1. <tbody id="1bn9l"><div id="1bn9l"><td id="1bn9l"></td></div></tbody><bdo id="1bn9l"></bdo>
    2. 咨詢電話:021-66524824
      產品展示 PRODUCTS
      聯系我們 CONTACT

      地址: 上海靈石路622號





      恒暉 HT-200S 氣動圓面熱轉印機 您當前的位置:首頁 > 產品展示 > 熱轉印機系列

      恒暉 HT-200S 氣動圓面熱轉印機

      1 LOGO
      2 采用歐姆龍溫控器,確保發熱溫度穩定,保證燙印質量。
      3 膠輥旋轉傳熱燙印,膠輥以直線與加工面接觸,能避免加工面產生氣泡的缺陷,可獲得均勻美觀的圖案及文字。
      4 設有高精度光電管(電眼),對帶接點的轉印紙進行跟蹤到位控制。
      5 對無接點的轉印紙采用定時送紙的方式。
      6 燙印壓力、溫度、速度均可調。
      7 內設六位自動計數器。
      8 工作臺可前后左右調節,管位可調校與膠輥的平行度。
      9 燙印頭位置高低可調,滿足不同高度工件的需要。
      10 本機構造穩固耐用,調校簡易。 
      膠輥尺寸: 150×φ102mm
      最大轉印工件直徑: φ190mm
      燙印溫度選擇范圍: 室溫~280攝氏度
      最大燙印速度: 900pcs/hr
      電源: 110/220V 60/50Hz
      發熱功率: 1000W
      氣源壓力: 2168N 7bar
      耗氣量: 103L/min
      外形尺寸: 1014×632×1680mm
      重量: 150kg

      1.Microprocessor control and LCD display (English and chineseversion switchable), easy to operate;
      2.Rubber roller’s rotating and heat transfering. Rubber roller rectilinearly contacts with substrate surface can avoid blister occurrence on the surface and obtain uniform and nic-looking image and character;
      3.High precision sensor(mageic eye) is designed to monitor the black dot on the foil for feeding control. If no black dot is available, the feeding will be controlled by a timer;
      4.Left and right and front and rear of working table can be adjusted. Rubber roller’s parallelism can also be aligned;
      5.Stamping pressue, temperature and speed are adjustable;
      6.An automatic 5-digit counter is installed;
      7.Heat transfer roller can be adjusted up and down;
      8.Structure is stable and durable, easy to adjust. 
      Max. stamping pressure: 2138N;
      Rubber roller size: φ102×150mm;
      Max. diameter: φ190mm;
      Stamping temperature adjustable range: 0-280℃;
      Heating wattage: 1000W;
      Max. stamping speed: 900pcs/hr;
      Air consumption: 103Litre/min;
      Power: 110/220V 60/50Hz;
      Outline dimension: 1014×632×1680mm;
      Weight: 150Kg.